Senior RF/Electrical Engineer, Chantilly
Senior RF/Electrical Engineer, Chantilly
-
Chantilly, France
-
Publiée: il y a une semaine
-
Ajouter
Description
Job Summary As a Senior RF/Electrical Engineer at Lynk, you will be responsible for wearing many hats in the world of radio frequencies, electronics, hardware, and software. You will be responsible for the analysis, design, implementation, optimization and enhancement of our nanosatellite communications payload, and, ultimately, the future constellation network. Some work products will include link budgets analyses, system dimensioning for coverage and capacity, including traffic analysis and simulation, initial system design and dimensioning, coverage planning, frequency planning, interference analysis and mitigation techniques. This engineer will also be responsible for supporting the iterative design and test of our nanosatellite payload hardware/electronics and software. This will include working with software‑defined radios, single-board computers, FPGAs, SoCs, processors, LNAs, and filters – you will also be involved in our payload antenna selection and design. While playing with all this hardware on a bench, you’ll probably need to pick up a soldering gun, use a spectrum analyzer, assemble circuits on a breadboard, and/or configure an RF channel simulator.
If you enjoy the challenge of wearing many hats and have a track record of creative thinking to solve unconventional problems, then we look forward to meeting you!
Core Responsibilities Because Lynk is a small company, the RF/Electrical Engineer will be responsible for straddling engineering work in the domains of RF, electrical, mechanical, and software engineering.
Support design of spacecraft payload hardware, including single-board computers, SDRs, FPGAs, SoCs, processors, LNAs, filters, amplifiers, etc., and software design and development.
8+ years of RF/EE experience.
Support selection and design of nanosatellite antenna technologies.
Develop link budget analyses, simulations, traffic/capacity analysis, RF system design and dimensioning, coverage and frequency planning, etc.
Support spacecraft payload integration, testing, delivery to launch and spacecraft bus partners/vendors.
Design and plan payload testing configurations on the ground when testing payload communications performance both in‑lab and in‑orbit.
Interface with Systems Engineering team to inform constellation/network architecture and design based on RF communications payload performance.
Bench‑level mechatronics work including testing, integration, assembly, programming and prototyping of electronics hardware and software.
Some software‑based Systems Engineering analysis.
Support developing and maintaining technical documentation for payload design and development.
Must be able to work independently and in a team environment.
Qualifications
A Bachelor’s degree or better in RF or Electrical Engineering.
7+ years of experience working on projects doing design, integration, or test of space hardware.
Experience working on projects developing space payload hardware and software, preferably communications systems.
Hands‑on experience with software‑defined radios, antennas, FPGAs, GPUs, CPUs, SoCs, single‑board computers, microcontrollers is highly desired.
Programming proficiency in one or more programming languages is highly desired, such as C++, C, Python, MATLAB, etc.
Should have experience working with Linux based systems.
Familiarity with VHDL or Verilog and Altera or Xilinx FPGAs is desired.
Proficiency with electrical design software, such as Altium, is a plus.
Strong knowledge and understanding of RF air interfaces and their use of multiple access schemes such as TDMA, FDMA, OFDMA, CDMA, etc., is highly desired.
Hands‑on experience with integrating hardware and software systems is desired.
Must be good with computers. Fluent in Linux, Windows, and Mac OSX, very capable with Microsoft Office—Excel, Project, PowerPoint, Word.
Hands‑on experience with programming microcontrollers and SDRs is desired.
Knowledge of some communications/networking protocols, for instance, IP, TCP/IP, SNMP, SDH/SONET, Ethernet, Carrier Grade Ethernet, DSL, SS7, ISDN, Q2931, B‑ISDN, X.25, 802.11, 802.16, SIP, TDMA, FDMA, CDMA, LTE, EDGE, GPRS, HSPA, GSM, etc.
Job Location Chantilly, VA
#J-18808-Ljbffr
If you enjoy the challenge of wearing many hats and have a track record of creative thinking to solve unconventional problems, then we look forward to meeting you!
Core Responsibilities Because Lynk is a small company, the RF/Electrical Engineer will be responsible for straddling engineering work in the domains of RF, electrical, mechanical, and software engineering.
Support design of spacecraft payload hardware, including single-board computers, SDRs, FPGAs, SoCs, processors, LNAs, filters, amplifiers, etc., and software design and development.
8+ years of RF/EE experience.
Support selection and design of nanosatellite antenna technologies.
Develop link budget analyses, simulations, traffic/capacity analysis, RF system design and dimensioning, coverage and frequency planning, etc.
Support spacecraft payload integration, testing, delivery to launch and spacecraft bus partners/vendors.
Design and plan payload testing configurations on the ground when testing payload communications performance both in‑lab and in‑orbit.
Interface with Systems Engineering team to inform constellation/network architecture and design based on RF communications payload performance.
Bench‑level mechatronics work including testing, integration, assembly, programming and prototyping of electronics hardware and software.
Some software‑based Systems Engineering analysis.
Support developing and maintaining technical documentation for payload design and development.
Must be able to work independently and in a team environment.
Qualifications
A Bachelor’s degree or better in RF or Electrical Engineering.
7+ years of experience working on projects doing design, integration, or test of space hardware.
Experience working on projects developing space payload hardware and software, preferably communications systems.
Hands‑on experience with software‑defined radios, antennas, FPGAs, GPUs, CPUs, SoCs, single‑board computers, microcontrollers is highly desired.
Programming proficiency in one or more programming languages is highly desired, such as C++, C, Python, MATLAB, etc.
Should have experience working with Linux based systems.
Familiarity with VHDL or Verilog and Altera or Xilinx FPGAs is desired.
Proficiency with electrical design software, such as Altium, is a plus.
Strong knowledge and understanding of RF air interfaces and their use of multiple access schemes such as TDMA, FDMA, OFDMA, CDMA, etc., is highly desired.
Hands‑on experience with integrating hardware and software systems is desired.
Must be good with computers. Fluent in Linux, Windows, and Mac OSX, very capable with Microsoft Office—Excel, Project, PowerPoint, Word.
Hands‑on experience with programming microcontrollers and SDRs is desired.
Knowledge of some communications/networking protocols, for instance, IP, TCP/IP, SNMP, SDH/SONET, Ethernet, Carrier Grade Ethernet, DSL, SS7, ISDN, Q2931, B‑ISDN, X.25, 802.11, 802.16, SIP, TDMA, FDMA, CDMA, LTE, EDGE, GPRS, HSPA, GSM, etc.
Job Location Chantilly, VA
#J-18808-Ljbffr
Informations clefs
-
Nom de l’entrepriseLynk Global
-
Titre de posteSenior RF/Electrical Engineer
Conseils de Sécurité
Faites preuve de discernement : si une annonce semble trop belle pour être vraie, c’est probablement le cas.
Informations supplémentaires sur l’annonce
Senior RF/Electrical Engineer est visible sur Locanto dans la catégorie Creil Autres métiers.
Pour le moment, c’est la seule annonce dans cette catégorie pour Creil.
Il y a encore plus de petites annonces dans un rayon de 15 km pour cette catégorie. Cliquez ici pour consulter ces annonces.